The Conservation Rooflight from the Roofing Company is low-profile skylight, combining the highest modern performance standards with an authentic traditional appearance and is available in a wide range of sizes, along with a Bespoke Design Service.
Key features:
- Top hung, with exposed hinges, and authentic original cast iron features,
- Thermally efficient linings act as barriers & channel condensation,
- Moisture resistant linings for a clean internal finish,
- No bulky frame internally or externally maximising the available light,
- Favoured by planning officers/Conservation officers and often specified for grade 1 and 2 listed buildings,
- Manufactured from 3mm mild steel, finished in RAL 9005 (Black) textured protective polyester powder coating to BS EN ISO 12944.
- 10-year frame warranty, 5-year glazing warranty: *COASTAL: Please note, for properties that reside within 5km of the coastline or large estuary, we recommend calling our sales team to discuss an appropriate alternative of stainless steel. All Conservation rooflights are hot zinc sprayed.
- Suitable for installation/roof pitch between 17.5-65 degrees
- Rain sensors, temperature sensors and other accessories are available on request.
- The usual lead time is 5 working days for standard sizes/styles/options.
Glazing specification:
- 4mm Toughened outer, 16mm Argon Cavity, 4mm Low Emissivity (Low e) Toughened inner.
- Whole unit u-value (UW) of 1.4 W/m2K in accordance with BS EN ISO 10077-2:2012.
- Centre pane u-value of 1.0 W/m2K.
Opening options:
- Fixed Shut: A fixing bracket for a fixed shut roof window. The fixing bracket is white as standard.
- Manual hand winder: Available in brass or chrome with opening distances of either 150mm or 300mm.
- Manual pole winder : Winding crank for out of reach opening. Available in brass or chrome with opening distances of 150mm or 300mm. Poles are available in varying lengths from 1m to 3m.
- Motors: Motorised opening options are available for out of reach rooflights and can be controlled by a switch or remote. Contact us for more information.
- Motorised opening pack Small: For CR01-2 Chain Actuator (230v) with switch- 150mm opening (not suitable for installation into kitchen/bathrooms (areas of high humidity)
- Motorised opening pack Large: For CR09-2 & CR11-3 Chain Actuator (24v) with switch 250mm opening
Optional extras:
- Roller blinds available in 7 colours.
- Pleated blinds available in 6 colours.
- Rain sensors, temperature sensors and other accessories are available on request. Please consult with us directly for compatibility.
- Flashing Kit: can be used for ‘on the rafter’ and ‘between the rafter’ installations, where the roof depth (above the rafter) does not exceed 75mm
The usual lead time is 5 working days for standard sizes/styles/options.
Literature downloads:
Conservation Technical datasheet: (N.B. lists the structual, not the viewable, dims)
‘On the rafter’ installation detail
‘Between the rafter’ installation detail
Download Motor wiring guide: