Introducing a NEW Aluminium Roof Trim – ideal for use on small flat roof extensions, garden rooms, office pods and sheds.
A perfect high-quality, low-cost solution to the edging detail on your next small flat roof building project.
Available as standard in three widths:
- 100mm (to edge/trim/cap 75mm-100mm wide upstands)
- 125mm (to edge/trim/cap 100mm-125mm wide upstands)
- 180mm (to edge/trim/cap 125mm-180mm wide upstands)
Made to order from 1.5mm thick aluminium, polyester powder coated (PPC) in 27 standard matt colours for delivery in 10working days.
Available in many other BS or RAL colours, and can be colour matched to Little Green or Farrow and Ball colours, if necessary, for an additional surcharge and a longer lead-time.
For plain mill finish – get in touch to order over the phone on 0800 644 44 26 or email [email protected].
Key features:
- Simple installation – components consist of: 3m lengths, 90 angles; left-hand and right-hand stopends; (upstand stop ends; and junctions – get it touch if you need either of these),
- No fancy jointing – just use 2 beads of silicone on the joiner bracket supplied,
- No fancy fixings – just use standard screws (we recommend countersunk screw 4.0 (No.8). The max. screw length will vary dependent on the substrate, but in general: 40mm/1.5”)
- Use AluEdge trim over the top of your chosen membrane sheeting.
Only for use at heights no greater than 3m with the flat front edge to the outside of the building and the sloping back edge on the inner, ‘flat roof’ side.
If you don’t find what you are looking for on this website or the shop site, or have any other questions, please call our friendly, knowledgeable team for FREE on 0800 644 44 26 or email [email protected].